Blog

If you've recently subscribed to AT&T internet services and you'd like to install it on your own, you can do so by following these simple step-by-step instructions:

How to Install ATT internet by own your Self?

Here we mention Step-by-Step guide to ATT internet self-installation

Step 1: Gather the necessary equipment

Before you begin the installation process, ensure that you have all the necessary equipment provided by AT&T, including the Wi-Fi gateway, power cord, Ethernet cable, and DSL filter.

Step 2: Locate the best location for the Wi-Fi Gateway

The next step is to find the best location for the Wi-Fi Gateway, where it can receive the strongest signal from the AT&T network. Place it in a central location and away from any obstructions or metal objects.

Step 3: Connect the power cord

Plug the power cord into the Wi-Fi Gateway and connect the other end to an electrical outlet.

Step 4: Connect the DSL filter

If you're using a DSL connection, connect the DSL filter to the phone jack and plug the Ethernet cable into the DSL filter's port labeled DSL/HPNA. Skip this step if you're using a fiber connection.

Step 5: Connect the Ethernet cable

Connect one end of the Ethernet cable to the Wi-Fi Gateway's Ethernet port, labeled LAN, and the other end to your computer or laptop's Ethernet port.

Step 6: Turn on the Wi-Fi Gateway

Turn on the Wi-Fi Gateway by pressing the power button. Wait for a few minutes for the device to boot up.

Step 7: Configure the Wi-Fi Gateway

Open a web browser on your computer or laptop and type in the Wi-Fi Gateway's IP address. Log in to the AT&T router using the default username and password provided in the instructions.

Step 8: Activate your AT&T Internet Service

Follow the prompts to activate your AT&T internet service. You'll need to enter the required information, such as your account number and activation code.

Step 9: Create a Wi-Fi network name and password

Once your internet service is activated, create a Wi-Fi network name and password that you'll use to connect your devices to the internet.

Step 10: Connect your devices to the Wi-Fi network

Finally, connect your devices to the Wi-Fi network by selecting the network name and entering the password.

Conclusion

In conclusion, self-installing AT&T internet is a straightforward process that you can complete in a few easy steps. By following the steps above, you can save yourself the hassle and cost of a professional installation.